GRP sheet for plant engineering
GRP (fiberglass) sheets are lightweight and also strong and durable. They do not corrode, are easy to machine as well as electrically insulating. Due to these properties, they have a very flexible field of application and offer a variety of advantages over sheets made of conventional materials such as aluminum, metal, wood, or thermoplastics.
The surface is smooth on one side and the reverse side is matte.
Dimensions
The panel is available in 2.990 mm width and thickness of 1.0, 1.2, 1.5, 1.8, 2.0, 2.5, 3.0, 4.0, 5.0 and 5.5 mm.
Length upon request
Properties | M Pa |
---|---|
Flexural strength | 130 - 170 |
Tensile strength | 60 - 90 |
Compressive strength | 150 - 180 |
Elongation at fracture % | 1 - 2 |
E-modulus | 7000 - 10000 |
Poisson's ratio longitudinal/transverse | 0,23 |
Poisson's ratio transverse/longitudinal | 0,09 |
Impact strength kJ/m2 | 40 - 60 |
Density kg/dm3 | 1,3 - 1,5 |
Barcol hardness | 40 - 60 |
Electrical and thermal values | |
---|---|
Volume resistivity Ohm* cm | 10E15 - 10E16 |
Surface resistance DIN IEC 93 Ohm | 10E12 - 10E13 |
Dielectric strength DIN 53481 kV/mm2 | 15 - 25 |
Linear coefficient of thermal expansion 1/K | 30 - 40 *10E-6 |
Thermal conductivity W/mK | 0,21 |
Thermal transmittance W/m2K | 5,5 |
Application temperature °C | -30 - +80 |
Application temperature short term °C | -50 - +130 |
Vapour diffusion resistance coefficient µ | 60.000 - 90.000 |
Water absorption % | <1 |
Ember resistance Level | Level 3a |
Fire behaviour standard | DIN 4 102 B2 |