Dimensional Tolerances
Property | Tolerance | ||
---|---|---|---|
Profile height and width of flange | |||
![]() | Nominal dimensions (mm)
| ||
Diametre of Rods and Tubes | |||
![]() | D, d (mm) 0 - 10 | D ± 0,20 | d ± 0,20 |
Wall-thickness of open and closed profiles | Nominal dimensions (mm) | ||
![]() | Thickness 0 - 2 | T1 ± 0,15 | T2 ± 0,30 |
Flatness in transverse direction | |||
![]() | Tolerance F < 0,008 X B mm | ||
Size of angle | |||
![]() | Tolerance Y ± 1,5° | ||
Straightness | |||
![]() | Tolerance (B and H are overall
| ||
Twist | |||
![]() | Tolerance
| ||
Length of cut | |||
![]() | L + 20 / - 0 mm | ||
Angularity of cut | |||
![]() | V ± 1,5° |